Filters
Question type
Study Flashcards

Garza Corporation has two production departments, Casting and Customizing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Casting Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: Garza Corporation has two production departments, Casting and Customizing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Casting Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: The estimated total manufacturing overhead for the Customizing Department is closest to: A) $55,400 B) $21,600 C) $40,800 D) $19,200 The estimated total manufacturing overhead for the Customizing Department is closest to:


A) $55,400
B) $21,600
C) $40,800
D) $19,200

E) A) and C)
F) B) and D)

Correct Answer

verifed

verified

Lupo Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Lupo Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job T687 was completed with the following characteristics: The unit product cost for Job T687 is closest to: (Round your intermediate calculations to 2 decimal places.) A) $85.00 B) $65.00 C) $165.00 D) $195.00 Recently, Job T687 was completed with the following characteristics: Lupo Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job T687 was completed with the following characteristics: The unit product cost for Job T687 is closest to: (Round your intermediate calculations to 2 decimal places.) A) $85.00 B) $65.00 C) $165.00 D) $195.00 The unit product cost for Job T687 is closest to: (Round your intermediate calculations to 2 decimal places.)


A) $85.00
B) $65.00
C) $165.00
D) $195.00

E) A) and D)
F) A) and C)

Correct Answer

verifed

verified

Vanliere Corporation has two production departments, Machining and Finishing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Machining Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: Vanliere Corporation has two production departments, Machining and Finishing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Machining Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job A803. The following data were recorded for this job: The amount of overhead applied in the Machining Department to Job A803 is closest to: (Round your intermediate calculations to 2 decimal places.) A) $828.00 B) $792.00 C) $171.00 D) $174,800.00 During the current month the company started and finished Job A803. The following data were recorded for this job: Vanliere Corporation has two production departments, Machining and Finishing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Machining Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job A803. The following data were recorded for this job: The amount of overhead applied in the Machining Department to Job A803 is closest to: (Round your intermediate calculations to 2 decimal places.) A) $828.00 B) $792.00 C) $171.00 D) $174,800.00 The amount of overhead applied in the Machining Department to Job A803 is closest to: (Round your intermediate calculations to 2 decimal places.)


A) $828.00
B) $792.00
C) $171.00
D) $174,800.00

E) A) and D)
F) C) and D)

Correct Answer

verifed

verified

The management of Bullinger Corporation would like to investigate the possibility of basing its predetermined overhead rate on activity at capacity. The company's controller has provided an example to illustrate how this new system would work. In this example, the allocation base is machine-hours and the estimated amount of the allocation base for the upcoming year is 28,000 machine-hours. Capacity is 31,000 machine-hours and the actual level of activity for the year is assumed to be 26,700 machine-hours. All of the manufacturing overhead is fixed and both the estimated amount at the beginning of the year and the actual amount at the end of the year are assumed to be $42,560 per year. For simplicity, it is assumed that this is the estimated manufacturing overhead for the year as well as the manufacturing overhead at capacity. It is further assumed that this is also the actual amount of manufacturing overhead for the year.If the company bases its predetermined overhead rate on capacity, what would be the cost of unused capacity reported on the income statement prepared for internal management purposes? (Round intermediate calculations to 2 decimal places.)


A) $3,540.00
B) $4,005.00
C) $1,976.00
D) $5,981.00

E) B) and D)
F) All of the above

Correct Answer

verifed

verified

Rapier Woodworking Corporation produces fine cabinets. The company uses a job-order costing system in which its predetermined overhead rate is based on capacity. The capacity of the factory is determined by the capacity of its constraint, which is an automated jointer. Additional information is provided below for the most recent month: Rapier Woodworking Corporation produces fine cabinets. The company uses a job-order costing system in which its predetermined overhead rate is based on capacity. The capacity of the factory is determined by the capacity of its constraint, which is an automated jointer. Additional information is provided below for the most recent month: The predetermined overhead rate based on hours at capacity is closest to: A) $59.35 per hour B) $50.10 per hour C) $21.85 per hour D) $18.40 per hour The predetermined overhead rate based on hours at capacity is closest to:


A) $59.35 per hour
B) $50.10 per hour
C) $21.85 per hour
D) $18.40 per hour

E) C) and D)
F) B) and C)

Correct Answer

verifed

verified

Comans Corporation has two production departments, Milling and Customizing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Milling Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: Comans Corporation has two production departments, Milling and Customizing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Milling Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job A319. The following data were recorded for this job: The amount of overhead applied in the Milling Department to Job A319 is closest to: (Round your intermediate calculations to 2 decimal places.) A) $142,200.00 B) $552.00 C) $96.00 D) $474.00 During the current month the company started and finished Job A319. The following data were recorded for this job: Comans Corporation has two production departments, Milling and Customizing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Milling Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job A319. The following data were recorded for this job: The amount of overhead applied in the Milling Department to Job A319 is closest to: (Round your intermediate calculations to 2 decimal places.) A) $142,200.00 B) $552.00 C) $96.00 D) $474.00 The amount of overhead applied in the Milling Department to Job A319 is closest to: (Round your intermediate calculations to 2 decimal places.)


A) $142,200.00
B) $552.00
C) $96.00
D) $474.00

E) All of the above
F) B) and C)

Correct Answer

verifed

verified

Almaraz Corporation has two manufacturing departments--Forming and Finishing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: Almaraz Corporation has two manufacturing departments--Forming and Finishing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours. That predetermined manufacturing overhead rate is closest to: A) $6.62 B) $4.87 C) $4.10 D) $7.10 Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours. That predetermined manufacturing overhead rate is closest to:


A) $6.62
B) $4.87
C) $4.10
D) $7.10

E) A) and B)
F) B) and C)

Correct Answer

verifed

verified

In absorption costing, nonmanufacturing costs are assigned to units of product.

A) True
B) False

Correct Answer

verifed

verified

The management of Plitt Corporation would like to investigate the possibility of basing its predetermined overhead rate on activity at capacity. The company's controller has provided an example to illustrate how this new system would work. In this example, the allocation base is machine-hours and the estimated amount of the allocation base for the upcoming year is 58,000 machine-hours. Capacity is 78,000 machine-hours and the actual level of activity for the year is assumed to be 75,500 machine-hours. All of the manufacturing overhead is fixed and both the estimated amount at the beginning of the year and the actual amount at the end of the year are assumed to be $4,704,960 per year. It is assumed that a number of jobs were worked on during the year, one of which was Job Q20L which required 440 machine-hours.If the company bases its predetermined overhead rate on capacity, then the amount of manufacturing overhead charged to Job Q20L is closest to:


A) $35,692.80
B) $20,388.96
C) $27,419.63
D) $26,540.80

E) B) and C)
F) None of the above

Correct Answer

verifed

verified

Rocher Corporation has two production departments, Casting and Finishing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Casting Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: Rocher Corporation has two production departments, Casting and Finishing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Casting Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job A394. The following data were recorded for this job: Required:a. Calculate the estimated total manufacturing overhead for the Casting Department.b. Calculate the predetermined overhead rate for the Casting Department.c. Calculate the amount of overhead applied in the Casting Department to Job A394. During the current month the company started and finished Job A394. The following data were recorded for this job: Rocher Corporation has two production departments, Casting and Finishing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Casting Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job A394. The following data were recorded for this job: Required:a. Calculate the estimated total manufacturing overhead for the Casting Department.b. Calculate the predetermined overhead rate for the Casting Department.c. Calculate the amount of overhead applied in the Casting Department to Job A394. Required:a. Calculate the estimated total manufacturing overhead for the Casting Department.b. Calculate the predetermined overhead rate for the Casting Department.c. Calculate the amount of overhead applied in the Casting Department to Job A394.

Correct Answer

verifed

verified

a. Casting Department overhead cost = Fi...

View Answer

Meenach Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on 80,000 direct labor-hours, total fixed manufacturing overhead cost of $160,000, and a variable manufacturing overhead rate of $2.30 per direct labor-hour. Recently Job X387 was completed and required 120 direct labor-hours.Required:Calculate the amount of overhead applied to Job X387. (Do not round intermediate calculations.)

Correct Answer

verifed

verified

Estimated total manufacturing overhead c...

View Answer

Traeger Woodworking Corporation produces fine cabinets. The company uses a job-order costing system in which its predetermined overhead rate is based on capacity. The capacity of the factory is determined by the capacity of its constraint, which is an automated bandsaw. Additional information is provided below for the most recent month: Traeger Woodworking Corporation produces fine cabinets. The company uses a job-order costing system in which its predetermined overhead rate is based on capacity. The capacity of the factory is determined by the capacity of its constraint, which is an automated bandsaw. Additional information is provided below for the most recent month: The cost of unused capacity that would be reported as a period expense on the income statement prepared for internal management purposes would be closest to: A) $1,470 B) $13,230 C) $0 D) $14,700 The cost of unused capacity that would be reported as a period expense on the income statement prepared for internal management purposes would be closest to:


A) $1,470
B) $13,230
C) $0
D) $14,700

E) None of the above
F) All of the above

Correct Answer

verifed

verified

Coble Woodworking Corporation produces fine cabinets. The company uses a job-order costing system in which its predetermined overhead rate is based on capacity. The capacity of the factory is determined by the capacity of its constraint, which is an automated shaper. Additional information is provided below for the most recent month: Coble Woodworking Corporation produces fine cabinets. The company uses a job-order costing system in which its predetermined overhead rate is based on capacity. The capacity of the factory is determined by the capacity of its constraint, which is an automated shaper. Additional information is provided below for the most recent month: The predetermined overhead rate based on hours at capacity is closest to: A) $30.00 per hour B) $122.50 per hour C) $32.40 per hour D) $132.30 per hour The predetermined overhead rate based on hours at capacity is closest to:


A) $30.00 per hour
B) $122.50 per hour
C) $32.40 per hour
D) $132.30 per hour

E) C) and D)
F) A) and B)

Correct Answer

verifed

verified

A company will improve job cost accuracy by using multiple overhead rates even if it cannot identify more than one overhead cost driver.

A) True
B) False

Correct Answer

verifed

verified

Eisentrout Corporation has two production departments, Machining and Customizing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Machining Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: Eisentrout Corporation has two production departments, Machining and Customizing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Machining Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job T272. The following data were recorded for this job: The estimated total manufacturing overhead for the Customizing Department is closest to: A) $40,950 B) $19,800 C) $56,400 D) $76,200 During the current month the company started and finished Job T272. The following data were recorded for this job: Eisentrout Corporation has two production departments, Machining and Customizing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Machining Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job T272. The following data were recorded for this job: The estimated total manufacturing overhead for the Customizing Department is closest to: A) $40,950 B) $19,800 C) $56,400 D) $76,200 The estimated total manufacturing overhead for the Customizing Department is closest to:


A) $40,950
B) $19,800
C) $56,400
D) $76,200

E) A) and B)
F) All of the above

Correct Answer

verifed

verified

Beat Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Beat Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job M759 was completed. It required 60 machine-hours. The amount of overhead applied to Job M759 is closest to: (Round your intermediate calculations to 2 decimal places.) A) $750 B) $516 C) $984 D) $234 Recently, Job M759 was completed. It required 60 machine-hours. The amount of overhead applied to Job M759 is closest to: (Round your intermediate calculations to 2 decimal places.)


A) $750
B) $516
C) $984
D) $234

E) None of the above
F) C) and D)

Correct Answer

verifed

verified

Feauto Manufacturing Corporation has a traditional costing system in which it applies manufacturing overhead to its products using a predetermined overhead rate based on direct labor-hours (DLHs) . The company has two products, I63E and E76I, about which it has provided the following data: Feauto Manufacturing Corporation has a traditional costing system in which it applies manufacturing overhead to its products using a predetermined overhead rate based on direct labor-hours (DLHs) . The company has two products, I63E and E76I, about which it has provided the following data: The company's estimated total manufacturing overhead for the year is $2,063,250 and the company's estimated total direct labor-hours for the year is 45,000. The company is considering using a form of activity-based costing to determine its unit product costs for external reports. Data for this proposed activity-based costing system appear below: The manufacturing overhead that would be applied to a unit of product E76I under the activity-based costing system is closest to: A) $88.28 B) $96.29 C) $184.57 D) $10.13 The company's estimated total manufacturing overhead for the year is $2,063,250 and the company's estimated total direct labor-hours for the year is 45,000. The company is considering using a form of activity-based costing to determine its unit product costs for external reports. Data for this proposed activity-based costing system appear below: Feauto Manufacturing Corporation has a traditional costing system in which it applies manufacturing overhead to its products using a predetermined overhead rate based on direct labor-hours (DLHs) . The company has two products, I63E and E76I, about which it has provided the following data: The company's estimated total manufacturing overhead for the year is $2,063,250 and the company's estimated total direct labor-hours for the year is 45,000. The company is considering using a form of activity-based costing to determine its unit product costs for external reports. Data for this proposed activity-based costing system appear below: The manufacturing overhead that would be applied to a unit of product E76I under the activity-based costing system is closest to: A) $88.28 B) $96.29 C) $184.57 D) $10.13 Feauto Manufacturing Corporation has a traditional costing system in which it applies manufacturing overhead to its products using a predetermined overhead rate based on direct labor-hours (DLHs) . The company has two products, I63E and E76I, about which it has provided the following data: The company's estimated total manufacturing overhead for the year is $2,063,250 and the company's estimated total direct labor-hours for the year is 45,000. The company is considering using a form of activity-based costing to determine its unit product costs for external reports. Data for this proposed activity-based costing system appear below: The manufacturing overhead that would be applied to a unit of product E76I under the activity-based costing system is closest to: A) $88.28 B) $96.29 C) $184.57 D) $10.13 The manufacturing overhead that would be applied to a unit of product E76I under the activity-based costing system is closest to:


A) $88.28
B) $96.29
C) $184.57
D) $10.13

E) A) and B)
F) A) and C)

Correct Answer

verifed

verified

Heroux Corporation has two manufacturing departments--Forming and Customizing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: Heroux Corporation has two manufacturing departments--Forming and Customizing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month, the company started and completed two jobs--Job A and Job H. There were no beginning inventories. Data concerning those two jobs follow: Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments. The manufacturing overhead applied to Job H is closest to: (Round your intermediate calculations to 2 decimal places.) A) $22,680 B) $30,888 C) $29,880 D) $7,200 During the most recent month, the company started and completed two jobs--Job A and Job H. There were no beginning inventories. Data concerning those two jobs follow: Heroux Corporation has two manufacturing departments--Forming and Customizing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month, the company started and completed two jobs--Job A and Job H. There were no beginning inventories. Data concerning those two jobs follow: Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments. The manufacturing overhead applied to Job H is closest to: (Round your intermediate calculations to 2 decimal places.) A) $22,680 B) $30,888 C) $29,880 D) $7,200 Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments. The manufacturing overhead applied to Job H is closest to: (Round your intermediate calculations to 2 decimal places.)


A) $22,680
B) $30,888
C) $29,880
D) $7,200

E) None of the above
F) A) and B)

Correct Answer

verifed

verified

Longobardi Corporation bases its predetermined overhead rate on the estimated labor-hours for the upcoming year. At the beginning of the most recently completed year, the Corporation estimated the labor-hours for the upcoming year at 35,700 labor-hours. The estimated variable manufacturing overhead was $5.93 per labor-hour and the estimated total fixed manufacturing overhead was $805,392. The actual labor-hours for the year turned out to be 33,200 labor-hours. The predetermined overhead rate for the recently completed year was closest to:


A) $28.49 per labor-hour
B) $22.56 per labor-hour
C) $5.93 per labor-hour
D) $30.64 per labor-hour

E) C) and D)
F) A) and B)

Correct Answer

verifed

verified

Prather Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on the following data: Prather Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job P513 was completed with the following characteristics: The total job cost for Job P513 is closest to: (Round your intermediate calculations to 2 decimal places.) A) $690 B) $900 C) $1,400 D) $1,210 Recently, Job P513 was completed with the following characteristics: Prather Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job P513 was completed with the following characteristics: The total job cost for Job P513 is closest to: (Round your intermediate calculations to 2 decimal places.) A) $690 B) $900 C) $1,400 D) $1,210 The total job cost for Job P513 is closest to: (Round your intermediate calculations to 2 decimal places.)


A) $690
B) $900
C) $1,400
D) $1,210

E) A) and B)
F) A) and C)

Correct Answer

verifed

verified

Showing 301 - 320 of 408

Related Exams

Exam 1

Managerial Accounting and Cost Concepts

346 Questions

Exam 3

Job-Order Costing: Cost Flows and External Reporting

314 Questions

Exam 4

Process Costing

365 Questions

Exam 5

Cost-Volume-Profit Relationships

396 Questions

Exam 6

Variable Costing and Segment Reporting: Tools for Management

392 Questions

Exam 7

Activity-Based Costing: a Tool to Aid Decision Making

382 Questions

Exam 8

Master Budgeting

284 Questions

Exam 9

Flexible Budgets and Performance Analysis

491 Questions

Exam 10

Standard Costs and Variances

469 Questions

Exam 11

Responsibility Accounting Systems

335 Questions

Exam 12

Strategic Performance Measurement

153 Questions

Exam 13

Differential Analysis: the Key to Decision Making

432 Questions

Exam 14

Capital Budgeting Decisions

405 Questions

Exam 15

Statement of Cash Flows

221 Questions

Exam 16

Financial Statement Analysis

327 Questions

Show Answer